1.24
MAINTENANCE
WARNING - PREVENT ACCIDENTS: Stop the engine
and disconnect the spark plug lead (also disconnect the
negative battery lead on electric start models) before
attempting to carry out maintenance procedures on the
mower.
ENGINE
Finger Guard
1.
2.
Carburettor
3.
Spark Plug / Lead
Muffler Guard
4.
5.
Muffler
Oil filler Cap/ Dipstick
6.
7.
Start Grip
8.
Fuel Cap
Air Cleaner
9.
THROTTLE CABLE ADJUSTMENT
Loosen the outer cable clamp screw (1) and move the gov-
ernor control lever (2) to the left as far as possible. Insert a
large, flat blade screw driver (3) into the slot in the engine
control bracket (4) at the angle shown. Push the governor
control lever to the right until it just touches the screw dri-
ver blade. Move the throttle control lever to the 'fast' posi-
tion (not the 'choke' position) and re-tighten the outer cable
clamp screw.
MAINTENANCE
1
9
2
3
7
8
3D319R08
5
4
3
2
CS039
305144MA050899A
1.24
6
1
4