Hayter Harrier 41 Owner's Handbook Manual
Hide thumbs
Also See for Harrier 41:
- Owner's handbook manual (47 pages) ,
- Owner's handbook manual (35 pages) ,
- Owner's handbook manual (36 pages)
Related Manuals for Hayter Harrier 41
Summary of Contents for Hayter Harrier 41
- Page 1 Harrier 41 CODES 410, 412, 413 OWNER’S HANDBOOK Original Version (EN) From Serial No. 313000001 onwards Issue: 12.10.12 Part Number: 3374-352 (A)
-
Page 2: Table Of Contents
CONTENTS - Grassbag Contents - Collection Without Grassbag - Heavy Growth Introduction - Friction Disc - Non-Grassed A reas - Maintenance Schedule Safety Precautions 5 - 6 - Safety A lert Symbol 5 ... -
Page 3: Introduction
The safety precautions listed in this handbook and all other generally recognised regula- tions on safety must be observed at all times. For a full range of products and to locate your nearest authorised sales stockist, service or parts dealer please visit our website at www.hayter.co.uk... - Page 4 SPECIFICATIONS / MAIN FEATURES Code Briggs & Stratton Briggs & Stratton Briggs & Stratton Engine Series 650 Series 650 Series 650 Engine type 2750 rpm 2750 rpm 2750 rpm Unleaded petrol ...
-
Page 5: Safety Precautions
towards you. restrict the age of the operator. - replace all fuel tank and container caps securely. Always replace worn or faulty parts with genuine Hayter Never mow while people, especially children, or pets are Replace faulty silencers. -
Page 6: Maintenance & Storage
SAFETY PRECAUTIONS Operation cont Allow the engine to cool before storing in any enclosure. Always ensure the blade has stopped, by releasing the Stop the engine and disconnect the spark plug lead: - Before clearing blockages or unclogging the dis- engine stop lever, before tilting the mower for ... -
Page 7: Delivery Checklist
following items have been supplied correctly. If any the frame (1) into the grassbag (2), ensuring that the han- items are missing contact, your local Hayter dealer. dle is above the grassbag as shown. A ttach plastic clips ... -
Page 8: Controls
OPERATING THE MOWER Only operate the lever with the engine running to prevent Controls Electric Start damage. Operate all control levers several times and ensure that (Code 412 only) the cables move freely. Check that the engine stop and Stand behind the mower and hold the handlebar together ... -
Page 9: Stopping
OPERATING THE MOWER Stopping Before Mowing (Code 413 only) To prevent accidents, thoroughly inspect the area and remove all objects which when contacted by the Release the ground drive clutch lever and release the mower cutterblade could become dangerous projec- engine stop lever. -
Page 10: Heavy Growth
OPERATING THE MOWER / MAINTENANCE SCHEDULE - Check the clutch cable adjustment. Heavy Growth Maintenance Schedule - Sharpen the cutterblade. Areas of heavy growth should be mown without Follow the hourly or calendar intervals, whichever occurs 50 Hours Or Every Season mow the area without the grassbag at the maximum ... -
Page 11: Carburettor Adjustments
After servicing, install the cartridge into the cover. Insert instructions. out by an authorised Hayter Service dealer. the tabs on the bottom of the cover into the slots in the bottom of the base (4). Tilt the cover upwards and se-... -
Page 12: Deck Housing
to avoid the risk of injury should the tool slip. use on treated grass and store well away from corrosive tighten the inner lock nut to secure position. (Refer ALWAYS use genuine Hayter replacement parts. materials. ... -
Page 13: Cutterblade Assembly
MOWER MAINTENANCE damage may occur on re-starting. Do not replace the Cutterblade Assembly Storage spark plug lead. Slowly pull the engine start - grip once Assemble the cutterblade with the turned up edges facing Ensure that the cables do not become trapped at the pivot ... -
Page 14: Battery Charging
MOWER MAINTENANCE - Disconnect the battery lead from the charger and then in the area. Battery Charging connect the battery lead to the mower lead. (Code 412 only) (c) T he consumer has a critical role in returning waste -... -
Page 15: Lawn Care Calendar
LAWN CARE CALENDAR To be used as a guide only January June October There is very little work to do this month apart from Summer mowing should now be under way. It should be Rake out the thatch from the turf and spike the lawn to brushing away leaves. -
Page 16: Trouble Shooting
TROUBLE SHOOTING PROBLEM CAUSES CORRECTIVE A CTION PROBLEM CAUSES CORRECTIVE A CTION Discharge chute blocks 1. Grass is wet 1. Mow dry grass 1. Engine stop lever released 1. Operate engine stop lever 2. Cut height is too low 2. -
Page 17: Warranty Statement
Extended 5 Y ear Warranty Hayter Service Dealer. These services should be carried out within 12, 24, 36 and 48 months of the date of purchase. Please note that these services will be charged at a rate agreed ... -
Page 18: Eu Privacy Statement
certain personal information with us, either directly or through your local Hayter dealer. Your personal information will be processed by Hayter in the UK. It will also be entered into the Toro warranty system, which is hosted on servers located within the ... - Page 19 NOTES NOTES...
-
Page 20: Service Records & Customer Info
We certify that this service has been carried out by anAuthorised been carried out by anAuthorised been carried out by anAuthorised been carried out by anAuthorised Hayter Service Dealer Hayter Service Dealer Hayter Service Dealer Hayter Service Dealer Date:____________________...