Shure DDS 5900 User Manual page 47

11.2.6 Remove a microphone from the request list
mic_request_off <seat no><CR>
Remove a microphone from the request list.
11.2.7 Clear the request list
mic_all_requests_off<CR>
Clear the request list.
11.2.8 Set the next microphone on
mic_next_on<CR>
Turns off the first microphone in the speak list and turns on
the first microphone from the request list.
11.2.9 Set the maximum number of total speakers
max_total_speakers <max total speakers><CR>
Maximum number of speakers allowed to speak.
11.2.10 Set the maximum number of delegate speakers
max_speakers <max speakers><CR>
Maximum number of delegates allowed to speak.
11.2.11 Set the maximum number of requests
max_requests <max requests><CR>
Maximum number of delegates allowed in the request list.
11.2.12 Set the Operation Mode
mic_mode <mode><CR>
Set the system operation mode.
11.2.13 Set the Interrupt Mode
mic_interrupt <mode><CR>
Set the ability to interrupt. Defines, whether microphones
should interrupt or not.
11.2.14 Retrieve the Microphone Status
mic_status<CR>
Ask the CU to deliver status of the system (microphones in
speak, and microphones in request list).
If the CU removes the unit from the request list and it
issues the 'mic_request_off' command.
The CU responds by issuing the 'mic_request_off'
command for each microphone that is removed from the
request list.
If a microphone is turned off, the CU issues the 'mic_off'
command.
If a microphone is turned on, the CU issues the 'mic_on'
command and the 'mic_request_off' command.
<max total speakers> Can be set from "1" to "8"
The CU issues the 'max_total_speakers' command.
<max speakers> Can be set from "1" to "8"
The CU issues the 'max_speakers' command.
<max requests> Can be set from "0" to "250".
The CU issues the 'max_requests' command.
<mode> Can be set to "auto" (Automatic), "fifo" (First-in-
first-out), "manual" (Manual) or "vox" (Voice Active)
The CU issues the 'mic_mode' command.
<mode> Can be "on" (microphones interrupt) or "off"
(microphones do not interrupt)
The CU issues the 'mic_interrupt' command
The CU issues the microphone system status. The status
is a list of commands from the CU:
seat_number (for all microphones in the system)
mic_mode