Operating Card 2 = Diagnostics - Siemens OCI600 User Manual

Note
20/72
Building Technologies
HVAC Products
2.3.2

Operating card 2 = Diagnostics

2.3.2.1 General displays
Operating card 2 of the OCI600 only contains diagnostic val-
ues. You cannot change any of them.
SW Version
Here, you can view the software version of the OCI600 cen-
tral communication unit.
LPB Communication Version
Here, you can see the LPB version supported by the com-
munication interface.
Serial Number
Before leaving the factory, each central communication unit
is given an unambiguous production number. This number is
useful in connection with service work.
Configuration Version OCI600
Here, you can see the configuration version supported in
connection with Minitel applications.
Status Modem Communication
Here, you are given the state of modem communication. For
details, refer to the subsection below.
2.3.2.2 Modem displays
When selecting line number 60 on operating card 2, the state
of modem communication can be monitored.
Status display "60" is maintained and does not automatically
switch to the standard display (time of day).
User Manual OCI600
Operating elements of the central communication unit
FILE
74 319 0002 0 c
15.07.2005