Jack JK-T1790 Manual page 52

5.3 缝制数据一览 Sewing data list
NO.
S01
缝制形状
Sewing shape
从缝纫机具有的 30 种的缝制形状中选择形状。
This item selects the shape from among the sewing shapes of 30
different kinds which the sewing machine has.
1 ～
S02
切布长度
Cloth cut length
设定用切布刀切断缝制品的长度。 但是， 图
案形状(S01 的形状 NO.27,28,29,30)时，为设定
缝制长度。把存储器开关数据的
定为有效， 然后按照
切断缝制品
This item sets the length of cloth that is cut by cloth cutting knife.
However, in case of bar-tack shape (Nos.27, 28, 29and30of S01),
sewing length is set. By marking effective
plural motions of cloth cutting knife of memory switch data,make the
plural motions of knife size set in the item
knife size, and the sewing product is cut.
S03
切刀槽右宽度
Knife groove width, right
设定切刀和右平行布的间隙。
This item sets the clearance between cloth cutting knife and right
parallel section
S04
切刀槽左宽度
Knife groove width, left
设定切刀和左平行部的间隙。
This item sets the clearance between cloth cutting knife and left
parallel section.
S05
左包边宽度
Overedging width, left
设定左平行部的包边宽度。
This item sets the overedging width of left parallel section.
项目
Item
30
切布刀数次动作功能设
切布刀尺寸设定的切刀尺寸数次地
Functive of
Cloth cutting
- 45 -
设定范围 编辑单位
Setting range Edit unit
1～30 1
3.0～120.0 0.1mm
-2.00～2.00 0.05mm
-2.00～2.00 0.05mm
0.10～5.00 0.05mm
备考
Remarks
---
---
---
---
---