Advertisement
3.
Repeat steps
1
and
lift cylinder.
8
Assembling the Transport
Strap to the Machine
Parts needed for this procedure:
1
Transport strap
2
Hairpin
Procedure
1.
Remove the 2 hair pins that secure the transport
strap for the cutting-unit 4 and the cutting-unit
5 lift arms
(Figure
1. Hair pin
2.
Assemble the transport strap of the 5 to 7
conversion kit onto the pins of the center frame
channel
(Figure
2
for the hoses of the other
19).
Figure 19
2. Transport strap (5 to 7
conversion kit)
19).
3.
Insert the 2 hair pins that you removed in
the 2 hair pins from the 5 to 7 conversion kit into
the studs
9
Assembling the Control
Lever to the Control Valve
Parts needed for this procedure:
2
Control lever
2
Clevis pin
6
Cotter pin
2
Link plate
2
Link plate
Procedure
1.
Align the hole in the control lever with the holes
in the fork of the control valve for cutting-unit 6
(Figure
20).
1. Cotter pin
2. Control lever
2.
Assemble the lever to the fork with the clevis pin
and cotter pin
3.
Assemble the link through the holes in the
g322288
mounting tab of the control valve and the control
lever
(Figure
9
(Figure
19).
Figure 20
3. Fork (control valve)
4. Clevis pin
(Figure
20).
21).
1
and
g322270
Advertisement
