Advertisement
Note:
Ensure that there are no kinks or twists
in the chain.
1. Long shackle
2. Clevis pin and cotter pin
3. Outer mounting hole
5.
Hook the spring to the fifth link in the chain from
the cutting unit, and secure the other end of the
spring to the lift bail with the S-hook
6.
Repeat steps
1
through
the machine.
14
Connecting the Transport
Frame Hoses to the Tow
Vehicle
No Parts Required
Procedure
1.
Remove the dust caps from the transport frame
hydraulic hoses.
2.
Attach the hydraulic hose couplers to the tow
vehicle.
3.
Start the engine.
4.
Raise and lower the cutting units.
Important:
Do not operate the transport
frame-lift system and deplete the hydraulic
Figure 35
4. Spring
5. S-hook
(Figure
5
at the other side of
fluid of the of the tow vehicle; pump
cavitation may occur.
5.
Lower the cutting units, shut off the engine,
remove the key, and wait for all moving parts
to stop.
6.
If needed, refill the hydraulic reservoir with fluid
recommended for tow vehicle, or use ISO 68 or
hydraulic fluid like Mobil 424.
Operation
Securing Cutting-Unit Arms
for Transport
1.
Fully raise all mowers are to the transport
position before moving to the next mowing area.
2.
Remove the hairpins securing the transport
straps to the pins of the center frame channel
g012726
and remove the straps.
3.
Assemble the transport strap onto the lift-arm
pins and secure the straps with the 2 hairpins.
35).
1. Hairpin
2. Transport strap
4.
Repeat step
14
Figure 36
3. Pins (lift-arm)
3
for the other pair of lift arms.
g322287
Advertisement
