Toro Reelmaster 33452 Operator's Manual page 2

Figure 2
2. Disconnect the 2 hydraulic hoses from the tow
vehicle (Figure 3).
Figure 3
1. Hydraulic hoses
3. Install the dust caps over the hydraulic couplers
(Figure 3).
g321863
g321862
2. Hydraulic couplers
2
Installing the Fittings to the
Control Valves
Parts needed for this procedure:
2 Short 90° fitting
2 Tall 90° fitting
Procedure
1.
Remove the socket-head plugs from the
cutting-unit 6 and the cutting-unit 7 control
valves (Figure
1. Control valve (cutting-unit
7)
2. Socket-head plugs
2. Lubricate the O-rings of the 4 90° hydraulic
fittings with clean hydraulic fluid.
3. Assemble the short 90° fittings into the retract
ports of the cutting-unit 6 and the cutting-unit 7
control valves
2
4).
Figure 4
3. Control valve (cutting-unit
6)
(Figure 5).
g321919