Advertisement
* Loosen both orange hand screws, one on the front side and on the
back side of the retroprojector (indicated on next images).
* Pull on the fixation on the back side of the retro and turn the projector
frame until service position 2 is reached. The fixation points will
automatically jump into the correct position when turning the frame
to this position.
* Open the cover plate of the electronics (front side of the retroprojector)
by loosening both retraining screws and pivot the plate downwards.
* The AC power input board is located on the left handside of the
projector.
* Loosen the retaining screws of the AC power input board and pull
out this board.
* Pull out the 'power selector plug' and re-insert it as illustrated in the
5976002 RETROGRAPHICS 808s 100299
2
AC power connection
5-3
Advertisement
