CNB SKB-20Z12F User Manual

Interior ptz dome camera
Table of Contents

Advertisement

Available languages

Available languages

Quick Links

Interior PTZ Dome Camera SKB-20(1)Z12F
User's Manual
(3812-0278B3)
Ver 1.14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SKB-20Z12F and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for CNB SKB-20Z12F

  • Page 1 Interior PTZ Dome Camera SKB-20(1)Z12F User’s Manual (3812-0278B3) Ver 1.14...
  • Page 2 Warnings Cautions Important Safeguard CAUTION ◎ Read all of the safety and operating instructions before using the product. RISK OF ELECTRIC SHOCK DO NOT OPEN ◎ Save these instructions for future reference. ◎ Do not use attachments or accessories unless recommended by the appliance CAUTION : TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT OPEN COVERS.
  • Page 3: Table Of Contents

    Features OSD MENU (Details) ------------------------------------------------- 6 SONY OSD Product ------------------------------------------------- 8 General Rules of Key Operation for Menu ---------------------------------------------- 24 MAIN MENU ------------------------------------------------------------------------------------- 24 MENU PASSWORD SETUP ---------------------------------------------------------------- 24 Installation ------------------------------------------------- 9 DISPLAY SETUP ------------------------------------------------------------------------------- 25 AREA LABEL SETUP ------------------------------------------------------------------------- 25 Operation CAMERA SETUP ------------------------------------------------------------------------------ 26 ------------------------------------------------- 18...
  • Page 4 Camera Specifications PTZ(Pan/Tilt/Zoom) Control ◎ CCD Sensor : 1/4” Interline Transfer CCD ◎ With RS-485, 422 communication, max. 255 of cameras can be controlled at the same ◎ 12x Optical Zoom, 12x Digital Zoom (Max. 144x Zoom) time. ◎ Using the remote controller can control the camera (max 10 meters range) ◎...
  • Page 5 Basic Components Camera ID Setup ◎ ID number of camera is set using dip switch. The example is shown below. Camera ID Camera ID ㆍ ㆍ ㆍ Main Body Ceiling Bracket Product Bracket ㆍ ㆍ ㆍ ㆍ ㆍ ㆍ Cable Cover Guide Pattern Manual ㆍ...
  • Page 6 Communication Protocol Setup Termination Switch Setting ◎ Select the appropriate Protocol with DIP switch combination. (Pin 1~3) ◎ Termination switch(Pin 6~7) is used in cases listed below. PROTOCOL BAUDRATE Termination Switch is used in case listed below. SONY 9600bps ◎ Long-distance communication between the controller and the camera (1-to-1 SONY 38400bps connection)
  • Page 7 SKB-20(1)Z12F Installation ④ Fix the camera with the fixing screw. ① Install Ceiling Bracket on Ceiling. ② Attach the product installation bracket to the camera. ⑤ I ⑤ Insert the Cable Cover into Ceiling Bracket. and fix it with the supplied fixing screw. t th C bl C i t C ili d fi it ith th...
  • Page 8 Cabling ◎ RS-485,422 Communication - For PTZ control, connect this line to keyboard and DVR. To control multiple cameras at the same time, RS-485,422 communication lines of them is connected in parallel as shown below. Image Output Device RS485 RS422 ◎...
  • Page 9 Connection Connection ◎ RS-422 supports connection method when using the controller. ◎ RS-485 supports connection method when using the controller. Controller CNB Camera CNB Camera Controller CNB Camera CNB Camera 1 TXD OUT+ 1 TXD IN 1 TXD IN 1 TXD OUT+...
  • Page 10 Check points before operation Starting OSD Menu ◎ Before power is applied, please check the cables carefully. • Function Using the OSD menu, Preset, Pattern, Swing, Group and Alarm Input function ◎ The camera ID of the controller must be identical to that of the target camera. can be configured for each application.
  • Page 11 SWING GROUP • Function : By using Swing function, you can make camera to move between 2 Preset • Function : The group function allows running sequence of Presets, Pattern and/or Swings. positions repeatedly. When swing function runs, camera moves from the preset Max 8 group can be stored.
  • Page 12 Other Functions OSD Display of Main Screen • PWR UP ACTION : This function enables to resume the last action executed before power down. Most of actions such as Preset, Pattern, Swing and Group are available for Preset Label LABEL12345 PRESET Action Title this function but Jog actions are not available to resume...
  • Page 13: General Rules Of Key Operation For Menu

    General Rules of Key Operation for Menu DISPLAY SETUP ◎ The menu items surrounded with < > always has its sub menu. ◎ This menu defines Enable/Disable of OSD display on ◎ For all menu level, to go into sub menu, press NEAR key. DISPLAY SETUP Main Screen.
  • Page 14: Camera Setup

    CAMERA MODULE SETUP AUTO EXPOSURE SETUP ◎ Setup the general functions of zoom camera module. • BACKLIGHT AE SETUP ▬ GLOBAL • FOCUS MODE [AUTO/MANUAL/SEMIAUTO] [ECL(0~100)/WDR(W-REAR,W-MIDDLE, ☞ BACKLIGHT W FRONT)/ BLC(LOW MIDDLE HIGH)/OFF] W-FRONT)/ BLC(LOW. MIDDLE, HIGH)/OFF] - Sets camera focus mode. DAY /NIGHT <...
  • Page 15: Motion Setup

    JOG SETUP ※ Below is the reference table for various AUTO EXPOSURE functions. ◎ Setup the Jog speed and Direction. 3D-DNR Day&Night BACKLIGHT • AUTO FLIP [ON/OFF] JOG SETUP Exposure Exposure Auto Auto D&N D&N - Refer to “Other Functions" section. ☞...
  • Page 16: General Rules Of Key Operation For Menu

    DISPLAY SETUP General Rules of Key Operation for Menu ◎ The menu items surrounded with < > always has its sub menu. ◎ This menu defines Enable/Disable of OSD display DISPLAY SETUP ◎ For all menu level, to go into sub menu, press NEAR key. on Main Screen.
  • Page 17: Camera Setup

    CAMERA MODULE SETUP AUTO EXPOSURE SETUP ◎ Setup the general functions of zoom camera module. • BACKLIGHT AE SETUP ▬ GLOBAL • FOCUS MODE [AUTO/MANUAL/SEMIAUTO] [ECL(0~100)/WDR(W-REAR,W-MIDDLE, ☞ BACKLIGHT W FRONT)/ BLC(LOW MIDDLE HIGH)/OFF] W-FRONT)/ BLC(LOW. MIDDLE, HIGH)/OFF] - Sets camera focus mode. DAY /NIGHT <...
  • Page 18: Motion Setup

    JOG SETUP ※ Below is the reference table for various AUTO EXPOSURE functions. 3D-DNR Day&Night BACKLIGHT ◎ Setup the Jog speed and Direction. JOG SETUP • AUTO FLIP [ON/OFF] Exposure Auto D&N ☞ ☞ AUTO FLIP AUTO FLIP - Refer to “Other Functions" section. JOG MAX SPEED 120 /SEC Auto...
  • Page 19: Preset Setup

    PRESET SETUP EDIT PRESET LABEL ◎ Edits label to show on monitor when camera arrives • PRESET NO. [1~128] PRESET SETUP EDIT LABEL-PRESET1 at presets. In Edit Label menu, a reverse - If a selected preset is already defined, camera ☞...
  • Page 20: Swing Setup

    SWING SETUP EDIT PATTERN • SWING NO. [1~8] SWING SETUP EDIT PATTERN1 EDIT PATTERN1 - Selects Swing number to edit. If a selected Swing ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ☞...
  • Page 21: Edit Group

    EDIT GROUP • ACTION ### [NONE/PRESET/SWING/PATTERN] EDIT GROUP EDIT GROUP EDIT GROUP ACTION ACTION DWELL DWELL ACTION ACTION DWELL DWELL ACTION DWELL • DWELL [0 sec~4minutes] ☞ PRESET 00 :03 PRESET 00 :03 - Sets Dwell Time between functions. NONE NONE NONE NEAR...
  • Page 22: System Initialize

    SYSTEM INITIALIZE • CLEAR ALL DATA [YES/NO] SYSTEM INITIALIZE - Deletes all configuration data such as display, ☞ ☞ CLEAR ALL DATA CLEAR ALL DATA ├ CLEAR DISPLAY SET camera, motion setup, password and so on. ├ CLEAR CAMERA SET ├...
  • Page 23 SYSTEM INITIALIZE (SONY) SYSTEM INITIALIZE (Pelco) Display Setup Display Setup Camera Setup Camera Setup Display Setup Display Setup Camera Setup Camera Setup Camera ID Focus Mode SEMIAUTO Camera ID Focus Mode SEMIAUTO PTZ Information AUTO Digital Zoom PTZ Information AUTO Digital Zoom Action Title AUTO...
  • Page 24 Remote Controller 1. PRESET - Run Preset. Number + PRESET. 2. MENU - OSD menu on. 3. NUMBERS - Numeric keypads(0~9) 4. CAM - Camera ID set. Number + CAM. 5. SHIFT - Save PRESET, PATTERN. Number + (SHIFT + PRESET). 6.
  • Page 25 Specification Model Number SKB-20(1)Z12F ◎ Product Bracket ◎ Ceiling Bracket Signal Type NTSC 1 0V p-p Composite Signal(75 ohms) 1.0V p p Composite Signal(75 ohms), Video Output Y/C Output Image Sensor 1/4'' High Sensitivity CCD Effective Resolution 768(H)×494(V) 380K 752(H)×582(V) 440K Horizontal Resolution 550 TV Lines [B/W 600 TV Lines] S/N Ratio...
  • Page 26 Interior PTZ Dome Camera SKB-20(1)Z12F 설치 및 사용 매뉴얼 Ver 1.14 (3812-0278B3)
  • Page 27 경 고 주의사항 안전에 대한 사항 안전에 대한 사항 주 의 ◎ 사용하시기 전에 안전에 대한 사항 및 본 제품의 조작 방법을 잘 읽어 주십시오. 전기적 충격이 있을 수 ◎ 제품의 올바른 사용을 위해서 사용설명서는 잘 보관하십시오. 있으니 열지 마시오 ◎...
  • Page 28 OSD 메뉴 기능 (세부내용) SONY OSD 제품 특징 --------------------------------------------------- 56 메뉴 사용법 --------------------------------------------------------------------- 74 메인 메뉴 ------------------------------------------------------------------------ 74 제품 구성품 --------------------------------------------------- 58 암호설정 ------------------------------------------------------------------------- 74 주 화면 OSD 표시 설정 주 화면 OSD 표시 설정 --------------------------------------------------------- 75 설치 AREA LABEL 설정 --------------------------------------------------------------- 75 --------------------------------------------------- 60 카메라...
  • Page 29 카메라 영상부 사양 PTZ 제어 ◎ 최대 255개까지 카메라를 동시에 연결하여 사용할 수 있습니다. ◎ 1/4” inch High Sensitivity CCD ◎ 최대 전면 부 10m 범위 내에서 리모컨을 이용해 카메라 제어가 가능 합니다. ◎ x12 광학 줌, x12 디지털 줌(최대 x144줌) ◎...
  • Page 30 기본 구성품 카메라 ID 설정 ◎ 카메라의 ID를 DIP 스위치의 조합으로 설정하며 각 핀의 설정 값은 다음과 같습니다. Camera ID 카메라 본체 천장형 브래킷 제품형 브래킷 ㆍ ㆍ ㆍ ㆍ ㆍ ㆍ 케이블 커버 시공지본 매뉴얼 ㆍ ㆍ ㆍ ㆍ ㆍ...
  • Page 31 통신 프로토콜 설정 종단저항 설정 ◎ 다음과 같이 DIP 스위치 1~3번을 선택하여 통신 프로토콜을 설정합니다. ◎ 다음과 같이 DIP 스위치 6~7번을 On/Off로 선택하여 종단저항을 설정합니다. 종단저항은 다음과 같은 경우에 사용합니다 종단저항은 다음과 같은 경우에 사용합니다. ◎ 제어기와 카메라의 통신 결선이 아주 긴 경우(1:1 연결) PROTOCOL BAUDRATE - 제어기와...
  • Page 32 제품 설치 방법 ① 천장형 브래킷을 4개의 스크류를 이용하여 천장에 설치합니다. ④ 1개의 고정 스크류로 제품을 고정합니다. ② 제품형 브래킷을 4개의 스크류를 이용하여 제품에 장착합니다 ⑤ 케이블 커버를 천장형 브래킷에 삽입한 후 2개의 고정 스크류로 고정합니다. ③ 제품형 브래킷을 장착한 스피드돔을 천장형 브래킷의 4개의 지시선에 일치하도록 본체를...
  • Page 33 결선 ◎ RS-422, 485 - PTZ제어 명령을 지령하는 키보드 제어기, DVR등을 연결하십시오. 여러 대의 카메라를 동시에 연결할 경우 RS 485 통신선을 병렬로 연결하여 사용하십시오 동시에 연결할 경우 RS-485 통신선을 병렬로 연결하여 사용하십시오. RS485 Image Output Device RS422 Termination Switch OFF Termination Switch OFF Termination Switch ON ◎...
  • Page 34 결선 결선 ◎ RS-422지원 컨트롤러 사용시 결선방법 ◎ RS-485지원 컨트롤러 사용시 결선방법 Controller CNB Camera CNB Camera Controller CNB Camera CNB Camera 1 TXD OUT+ 1 TXD IN 1 TXD IN 1 TXD OUT+ 1 TXD IN 1 TXD IN...
  • Page 35: 설치 확인

    설치 확인 OSD 메뉴 선택 ◎ 전원을 인가하기 전에 결선에 이상이 없는지 확인하여 주십시오. • 기능 : 카메라의 OSD 메뉴 기능을 사용하여 영상을 설정하거나, Preset, Pattern, Swing, ◎ 운전하고자 하는 카메라의 ID를 확인하신 후 제어기에서 올바른 카메라 번호를 선택 Group등과 같은 PTZ동작들을 설정할 수 있습니다. 하십시...
  • Page 36 스윙 그룹 • 기능 : 스윙 동작은 2개의 프리셋 위치를 왕복 운전하는 기능입니다. 스윙 운전을 실행 • 기능 : 그룹 기능은 프리셋, 패턴, 스윙 기능을 조합하여 반복적으로 실행하는 기능 입니다. 하면 먼저 첫 번째 프리셋에서 두 번째 프리셋 위치로 운전하고, 이후에 반대로 두 번째 최대...
  • Page 37: 기타 주요 기능

    기타 주요 기능 주 화면 OSD 구성 • POWER UP ACTION : 카메라에 전원을 인가하면 전원이 꺼지기 이전에 수행하던 동작을 다시 수행하는 기능입니다. 프리셋, 패턴, 스윙, 그룹 동작만 재 수행되고 조그 운전 동작은 Preset Label LABEL12345 PRESET Action Title 이 기능에서 제외됩니다. AREA01 Area Label •...
  • Page 38: 메인 메뉴

    메뉴 사용법 주 화면 OSD 표시 설정 ◎ <>안에 표기된 메뉴에는 하위 메뉴가 있습니다. ◎ 주 화면의 표시여부를 각 항목별로 설정합니다. ◎ 하위 메뉴로의 이동은 NEAR 키를 누르십시오. DISPLAY SETUP - AUTO로 설정한 경우에는 각 정보가 변경될 때에 ◎ 메뉴 항목에서 FAR 키를 누르면 이전 메뉴로 이동합니다 ◎...
  • Page 39: Image Adjust 설정

    IMAGE ADJUST 설정 AUTO EXPOSURE 설정 ◎ 카메라의 줌 모듈과 관련된 설정을 수행 합니다. • BACKLIGHT [ECL(0~100)/WDR(W-REAR,W-MIDDLE, IMAGE ADJUST • SHARPNESS LEVEL [0~100] AE SETUP ▬ GLOBAL W-FRONT)/ BLC(LOW. MIDDLE, HIGH)/OFF] - 영상의 선명도를 조절합니다. 영상의 선명도를 조절합니다 - 역광 보정 기능을 설정합니다. 역광...
  • Page 40: 모션 설정

    조그 설정 ※ AUTO EXPOSURE 설정을 할 경우, 아래 표를 참고 하시기 바랍니다. 3D-DNR Day&Night BACKLIGHT ◎ 조그 운전속도 및 운전방향을 설정하는 기능입니다. JOG SETUP • AUTO FLIP [ON/OFF] Exposure Auto D&N - “기타 주요 기능” 부분 참조하십시오. “기타 주요 기능” 부분 참조하십시오 ☞...
  • Page 41: 메뉴 사용법

    메뉴 사용법 주 화면 OSD 표시 설정 ◎ <>안에 표기된 메뉴에는 하위 메뉴가 있습니다. ◎ 주 화면의 표시여부를 각 항목별로 ◎ 하위 메뉴로의 이동은 NEAR 키를 누르십시오. DISPLAY SETUP 설정합니다. ◎ 메뉴 항목에서 FAR 키를 누르면 이전 메뉴로 이동합니다. ☞ CAMERA ID - AUTO로...
  • Page 42: Image Adjust 설정

    AUTO EXPOSURE 설정 카메라 모듈 설정 ◎ 카메라의 줌 모듈과 관련된 설정을 수행합니다 • BACKLIGHT [ECL(0~100)/WDR(W-REAR,W-MIDDLE, CAMERA SETUP • FOCUS MODE [AUTO/MANUAL/SEMIAUTO] AE SETUP ▬ GLOBAL 카메라의 F 카메라의 Focus 모드를 설정합니다. SemiAuto 모드는 모드를 설정합니다 S iA t 모드는 W FRONT)/ BLC(LOW MIDDLE HIGH)/OFF] W-FRONT)/ BLC(LOW.
  • Page 43: 모션 설정

    조그 설정 ※ AUTO EXPOSURE 설정을 할 경우, 아래 표를 참고 하시기 바랍니다. 3D-DNR Day&Night BACKLIGHT ◎ 조그 운전속도 및 운전방향을 설정하는 기능입니다. • AUTO FLIP [ON/OFF] JOG SETUP Exposure Auto D&N - “기타 주요 기능” 부분 참조하십시오. “기타 주요 기능” 부분 참조하십시오 ☞...
  • Page 44: 프리셋 설정

    프리셋 설정 프리셋 레이블 설정 • PRESET NO. [1~128] ◎ LABEL에서 반전되어 표시되는 부분이 현재 커서의 - 설정하고자 하는 프리셋 번호를 선택합니다. 이미 PRESET SETUP EDIT LABEL PRESET 1 ▬ 위치이며 글자를 선택하면 우측으로 위치가 이동합 위치이며 글자를 선택하면 우측으로 위치가 이동합 ☞...
  • Page 45: 스윙 설정

    스윙 설정 패턴 편집 • SWING NO. [1~8] SWING SETUP EDIT PATTERN 1 EDIT PATTERN 1 - 설정할 스윙 번호를 선택합니다. 선택한 스윙번호가 ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ☞...
  • Page 46: 그룹 편집

    그룹 편집 • ACTION ### [NONE/PRESET/SWING/PATTERN] EDIT GROUP EDIT GROUP EDIT GROUP • DWELL [0초~4분] ACTION ACTION DWELL DWELL ACTION ACTION DWELL DWELL ACTION ACTION DWELL DWELL - Action 종료 후 휴지시간을 설정합니다. • OPT ☞ NONE PRESET 00 :03 PRESET 00 :03 NONE...
  • Page 47: 시스템 초기화

    시스템 초기화 • CLEAR ALL DATA [YES/NO] SYSTEM INITIALIZE - Display 설정값, 카메라 설정값, 모션 설정값, Display 설정값 카메라 설정값 모션 설정값 ☞ CLEAR ALL DATA 암호 설정 값, 사용자 편집 데이터 전체를 초기화 합니다. ├ CLEAR DISPLAY SET ├ CLEAR CAMERA SET ├...
  • Page 48: 초기 설정값

    초기 설정값(SONY) 초기 설정값(Pelco) Display 설정 설정 카메라 설정 카메라 설정 Display 설정 설정 카메라 설정 카메라 설정 Camera ID Focus Mode SemiAuto Camera ID Focus Mode SemiAuto PTZ Information AUTO Digital Zoom PTZ Information AUTO Digital Zoom AREA LABEL AUTO Image Flip Action Title...
  • Page 49 리모컨 제어 1. PRESET - 프리셋 실행. 숫자+PRESET. 리셋 실행 숫자 2. MENU - 카메라 OSD MENU 진입. 3. NUMBERS - 숫자 키패드(0~9) 4. CAM - 카메라 ID 설정. 숫자+CAM. 카메라 ID 설정 숫자 CAM 5. SHIFT - 프리셋, 패턴 저장시 사용. 숫자+(SHIFT+PRESET). 6.
  • Page 50 제품 사양 ◎제품 브래킷 ◎ 천장 브래킷 Model Number SKB-20(1)Z12F Signal Type NTSC 1 0V p p Composite Signal(75 ohms) 1.0V p-p Composite Signal(75 ohms), Video Output Y/C Output Image Sensor 1/4'' High Sensitivity CCD Effective Resolution 768(H)×494(V) 380K 752(H)×582(V) 440K Horizontal Resolution 550 TV Lines [B/W 600 TV Lines] S/N Ratio...

This manual is also suitable for:

Skb-21z12f

Table of Contents