Advertisement
Quick Links
A) Deck/Header Assembly
Parts List:
B) Driver's Side Door Surround
C) Passenger's Side Door Surround
D) Door Surround Knobs
E) Side Tube Brackets
F) Hardware Pack
This Freedom Panel kit is designed to fit on your Factory hard top installed JK Jeep
your installation of this product, you will need to remove your existing Hard Top Freedom Panels. All pictures
shown in this instruction sheet are of a 4 door JK Wrangler. The Steps and installation for 2 Door JK Wrangler
will be the same. When installing this product, we highly recommend that you have two people as the
Deck/Header Assembly is quite large and is somewhat difficult to handle and maneuver with only one person.
Loss of vehicle control involves risk of death or serious injury, particularly to parts of your body not
restrained within vehicle. This product is intended for weather protection only and should not be relied upon
to contain occupants in the event of an accident or to protect from either ground contact or falling objects.
To reduce risk of accident or injury:
RISK OF EYE INJURY. Safety glasses should be worn at all times while installing or maintaining
this product.
Installation Instructions
Installation Instructions
SkyMaster™ Freedom Panel Replacement Soft Top
for 2007-2018 Jeep
QTY 1
QTY 1
QTY 1
QTY 4
QTY 2
QTY 1
•
ALWAYS WEAR SEATBELTS
•
Always keep head, arms & body parts within vehicle.
•
Fully secure or stow the soft top before driving according
to instructions. Never try to latch or fold soft top while
driving. Do not use if damaged or worn.
•
Read and follow all instructions & warnings accompanying
this product, in your vehicle owner's manual and Off Road
Driving Supplement.
Wrangler JK/JKU
®
Safety Glasses
Required Tools:
Razor Knife or Scissors
Phillips Head Screwdriver
5/32" Allen Head Driver
9/16" Socket Wrench & Driver
9/16" Wrench
Item # 158004XX
®
Wrangler. Before beginning
Advertisement
Related Manuals for MasterTop SkyMaster 158004 Series
Summary of Contents for MasterTop SkyMaster 158004 Series
- Page 1 Installation Instructions Installation Instructions SkyMaster™ Freedom Panel Replacement Soft Top for 2007-2018 Jeep Wrangler JK/JKU ® Item # 158004XX A) Deck/Header Assembly QTY 1 Safety Glasses Parts List: Required Tools: B) Driver’s Side Door Surround QTY 1 Razor Knife or Scissors C) Passenger’s Side Door Surround QTY 1 Phillips Head Screwdriver...
- Page 2 Important Safety information Your MasterTop SkyMaster Top is intended to be used with other MasterTop Products to increase the fair-weather ® enjoyment of your off-road capable vehicle. Before installation, please take a moment to review the following safety information and installation instructions. Important safety information is generally preceded by one of three signal words indicating the relative risk of injury.
-
Page 3: Installation Instructions
Installation Instructions SkyMaster Fold Back Sun Roof Installation: FIG1 FIG2 Step 1: Preparing the Horizontal over-door Put on safety glasses. After removing your Freedom roll bar for mounting of the SkyMaster Top Panels from the front of the vehicle, feel along the back of the horizontal roll bar above the driver’s door for holes that are under the factory roll bar padding. - Page 4 SkyMaster Fold Back Sun Roof Installation: FIG11 FIG12 Step 2: Mounting the Side Tube Brackets to the Horizontal Side Roll Bars Un-zip the driver’s side roll bar pad and fold it forward to expose the hard foam padding. Slowly pull down on the foam padding moving it side to side with a down- ward pressure to expose the “Christmas tree”...
- Page 5 Installation Instructions FIG25 Step 2: Mounting the Side Tube Brackets to the Horizontal Side Roll Bars (continued) When tightening, make sure the flat plastic is centered under the side tube bracket (FIG 25). Repeat this procedure on the other side of the vehicle. Once these side tube brackets are located and secured you will not have to remove them to place the Freedom Top panels or other accessories on the vehicle.
- Page 6 SkyMaster Fold Back Sun Roof Installation: This next step requires two people to help lift and stabilize the Deck/Header Assembly on the vehicle. You must use caution when placing the Header/Deck Assembly on the vehicle to avoid scratching the vehicle or damaging the SkyMaster Assembly.
- Page 7 Installation Instructions SkyMaster Fold Back Sun Roof Installation: FIG4 FIG42 Step 5: Securing the rear of the With the Deck/Header Assembly attached to the door Deck/Header Assembly to the Hard Top surrounds, it is extremely important to adjust the rear seal so it sits correctly onto the front of the hard top.
- Page 8 (Fig 55). This may need to be done on either one or both sides. ©MasterTop, Inc. 2020. All Rights Reserved. The term MasterTop is a Registered Trademark of ® MasterTop Incorporated, Registered in U.S. Patent and Trademark Office.
- Page 9 ® Your MasterTop Replacement Top is made of the finest materials available but to keep it looking new and for the maximum possible wear, it will need periodic cleaning and basic maintenance. The main threat to your soft top is pollutants, dirt and grime.
-
Page 10: Limited 3 Year Warranty
United States, MasterTop warrants to the initial retail purchaser only that your MasterTop accessory shall be free of defects in material and workmanship; for a period of 3 years from date of initial retail sale.
Need help?
Do you have a question about the SkyMaster 158004 Series and is the answer not in the manual?
Questions and answers