Introduction
1.1
Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing the device, connecting it
electronically, configuring the parameters and commissioning it, as well as service and
maintenance engineers.
1.2
Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition
05/2020
11/2019
1.3
Nameplate layout
1.3.1
Device identification
Each part of the FC Coriolis flowmeter has three nameplate types showing the following
information:
● product identification
● product specifications
● certificates and approvals
Note
Identification
Identify your device by comparing your ordering data with the information on the product and
specification nameplates.
SITRANS MASS 2100 & FC300 (FCT030)
Compact Operating Instructions, 05/2020, A5E40533698-AC
Note
Second edition
● Chapter Technical data (Page 53) updated
● Overall revision of chapters and contents
First edition
1
5