3.9 Filters
Hydraulic oil filter
1. Check the clogging indicator of the hydraulic oil filter.
(Picture 1)
2. If the clogging indicator is in the red zone, open the cap
with a wrench, change the hydraulic oil filter and put back
the cap. (Picture 1)
Filler water filter
1. Remove the filter cover. (Picture 2)
2. Clean the screen (blue part) and put it back. (Picture 3)
Inlet filter
1. Remove the filter cover. (Picture 4)
2. Clean the screen (red part) and put it back.
Operator's Manual City Ranger 3500
Service and maintenance
1
Clogging indicator
2
Filler water filter
3
Filler water filter screen
4
Inlet filter screen
Cap
51