Nilfisk-Advance City Ranger 3500 Operator's Manual page 35

Driving
· Choose the position of the right stalk switch
(Picture 1):
Forward - The machine drives forward
In middle position - Stop
Back - the machine drives backwards
Wait for it to come to a complete stop before
reversing the drive direction.
· Press the drive pedal.
For braking, there are three possibilities:
· Slowly loosen the drive pedal (engine brake). It is a
hydraulic brake that directly acts on the wheel
motors.
· Press on the brake pedal. In this case an assisted
brake system acts on the two front wheels.
· If, for any reason, the brakes do not respond , you
can use the parking brake that directly acts on the
front wheels as an emergency brake.
Warning!
!
To protect the hydraulic system, it is
important that the machine reaches the
operating temperature.
Warning!
!
Turn the steering wheel carefully. The
City Ranger 3500 is articulated – it turns
sharply and immediately.
Operator's Manual City Ranger 3500
Operator's manual
1
Right stalk switch
2
Brake pedal Drive pedal
35