High-Pressure Cleaner - Nilfisk-Advance City Ranger 3500 Operator's Manual

2.7 High-pressure cleaner

The City Ranger 3500 is equipped with a high-pressure
cleaner (optional) powered by the water tanks which are
integrated into the vehicle.
To operate, it is compulsory to plug in the gun to the
suitable hydraulic connector (rear part of the vehicle)
before activating the water circuit with the high-pressure
cleaner switch located on the front instrument panel.
(Pictures 1 + 2)
Attention!
!
When the switch of the high-pressure
cleaner is turned on, all the front
hydraulic functions are stopped.
Operator's Manual City Ranger 3500
Operator's manual
1
High-pressure cleaner switch
2
Hydraulic connector
Water level gauge
37