High-Pressure Cleaner Pump Oil - Nilfisk-Advance City Ranger 3500 Operator's Manual

3.7 High-pressure cleaner pump oil

Change the high-pressure cleaner pump oil after every 500
hours' use of the high-pressure cleaner.
Recommended oil
· for 110 bar pump: AGIP ROTA (SAE 75W -90) 0.135kg
· for 90 bar pump: INTERPUMP X-9.9. oil (SAE 20W-30W)
(quantity: 0.33 l).
Checking the level
Always be above the minimum oil level.
(Pictures 1 + 2 + 3)
Change of high-pressure pump oil
1. Remove the filler cap (red cap located above the pump)
and then the drain plug (located under the pump) in order
to allow the oil to drain in a drain pan.
2 After drainage, clean and put back the drain plug.
3. Fill the tank through the top of the pump and put back
the red filler cap. (Pictures 2 + 3)
Operator's Manual City Ranger 3500
Service and maintenance
1
High-pressure cleaner pump
2
Oil level of the pump 110 bar
3
Oil level of the pump 90 bar
47