Disposal; Plastics; Metals; Filter Elements - Kemper SmartFil Operating Manual

8 Disposal

WARNING
Skin contact with welding fumes, etc. can cause skin irritation in susceptible individuals.
Disassembly work on the product may only be carried out by trained and authorised
personnel while complying with the safety rules and the applicable accident prevention
regulations.
Serious injury to the lungs and respiratory tract is possible!
In order to avoid contact with and inhalation of dust, use protective clothing, gloves and
a blower respirator system.
The release of hazardous dusts must be avoided during dismantling work so that
persons in the vicinity are not harmed.
CAUTION
All work on and with the product must comply with the legal obligations for waste
avoidance and proper recycling/disposal.

8.1 Plastics

Plastics, if present, must be sorted as far as possible. Plastics must be disposed of in
compliance with the legal requirements.

8.2 Metals

Metals, if present, must be separated and disposed of.
Disposal must be carried out by an authorised company.

8.3 Filter elements

Filter elements, if present, must be disposed of in compliance with the legal requirements.
1502818-00 - 60 -
EN