Kemper SmartFil Operating Manual page 57

Item Designation
1 Filter element
2 Gasket ring
Changing the filter element:
1. Switch the product off at the device switch.
2. Prevent unintentional restarting by disconnecting the mains plug.
3. Remove the new filter element from the box and remove the sealing cap (item 3).
Ensure the sealing ring (item 2) is not damaged in the process.
4. Gently lift the saturated filter element (item 1) and carefully pull it out of the product
(arrows A + B).
5. Seal the saturated filter element with the sealing cap (item 3) of the new filter element
to make it airtight. Dispose of the saturated filter element in accordance with current
regulations.
Item Designation
1 Filter element
2 Gasket ring
1502818-00
Tab. 16: Filter replacement – Removing the filter element
Fig. 13: Filter replacement – Installing the filter element
Tab. 17: Filter replacement – Installing the filter element
Item Designation
3 Sealing cap
4 Mounting frame
Item Designation
4 Mounting frame
5 Sealing surface
- 57 -
EN