Zumtobel ONLITE local SB 128 Controller Operating Instructions Manual page 53


Assign the available messages to the
desired message types by marking the
appropriate checkboxes. The message
types can be combined as desired for
each message (from checking none to
checking all). This way, you can activate a
remote display via one of the relays,
trigger the buzzer and/or send a
corresponding SMS message in case of a
battery fault, for instance.
For the configuration of SMS messages,
several options are available. The chosen
SMS configuration is indicated by an
additional symbol right next to the
corresponding checkbox. The help screen
represented in the right-hand figure shows
the meanings of the different symbols.
Factory settings: Press this key to reset
the message assignments to the factory
settings (according to VDE 0801).
Note
When using a remote display for emergency lighting systems, pay attention to
national guidelines and regulations.
ONLITE local SB 128 Controller 51