Zumtobel ONLITE local SB 128 Controller Operating Instructions Manual page 46

Use the EZ PRO ADDRESS tool as follows:
• Start EZ PRO ADDRESS by simultaneously pressing the red and green
buttons.
• For each emergency luminaire, introduce the flashing pattern by using the
red/green buttons. At the end, the DALI address of the chosen luminaire will
be shown on the EZ PRO ADDRESS display.
• Repeat the previous step to obtain the DALI address for each emergency
luminaire in the system.
In this window a logical address can be
assigned to each luminaire with a certain DALI
address. During this process, all luminaires are
switched off. The "assign" button will be
inactive as soon as all the unaddressed
luminaires have been assigned with a DALI
and a logical address.

Press the "Next" button to save the sequence and the "Finish" button to finish the
assignment process and save the settings.
Having selected "Optical search method/GSM", the next window appears.

In this window, the installed luminaires are
ordered manually in the luminaire list.
First, all luminaires are switched off. To
assign the luminaires proceed as follows:
• Press auto-search. The luminaires of
the selected group start lighting
cyclically. The button changes from
auto-search to STOP.
• Press STOP as soon as the luminaire
you want to assign next lights up
brightly. The cyclic lighting is
interrupted and the button shows auto-search again.
44 ONLITE local SB 128 Controller