Table of Contents
Advertisement
The logical address indicates the position of the luminaire in the luminaire
display (status window ...). It can be edited using the numeric field located left of
the assign key. When pressing the up/down keys, the logical address is set to
the next free higher/lower address.
If the STOP key is pressed too late during the automatic search, the luminaires
can be illuminated in individual steps using the << and >> keys. Generally the
luminaires can also be ordered with these two keys without using the automatic
search function.
In the "location" text field information on the position of the luminaires can be
entered.
Press the assign key as soon as the desired luminaire is selected and lights up.
Doing so, this luminaire is inserted into the list with the selected logical address.
This position is displayed on the left of the assign key.
In the figure shown above, pressing the assign key would insert the luminaire
into the list as first luminaire. Then, the next free logical address is displayed.
Repeat these steps for all remaining luminaires until all luminaires are arranged
in the desired order.
Having assigned all luminaires within the group, the order has to be saved. For
that purpose press Next.
Now press Finish in order to complete the
assignment and to save the settings.
If not all luminaires have been assigned, a
message dialog appears asking whether
the remaining luminaires should be
assigned automatically. This way, the
luminaires are assigned in the order in
which they are detected to the next free
logical addresses.
Repeat the steps described above for the remaining DALI groups.
ONLITE local SB 128 Controller
45
Advertisement
Table of Contents
