Dali Bus - Zumtobel ONLITE local SB 128 Controller Operating Instructions Manual

2.5.2

DALI bus

The DALI bus (Digital Addressable Lighting Interface) is used for the communication of
the ONLITE local SB 128 Controller with ONLITE local emergency luminaires and for
connecting general lighting DALI luminaires. The ONLITE local SB 128 Controller
provides two separate DALI busses with an integrated bus supply (terminals A-D1, A-D2
for bus A and terminals B-D1, B-D2 for bus B).
Figure 3: Application example of integrating general lighting luminaires into the
ONLITE local check system through the DALI bus
The possibly available general lighting connected to the same bus is not affected by the
ONLITE local SB 128 Controller and can be controlled using an EMOTION Touch module
or LM-DALI, for instance.
ONLITE local SB 128 Controller 13