Luminaires Setup - Zumtobel ONLITE local SB 128 Controller Operating Instructions Manual

8.4

Luminaires setup

Using this menu, the connected luminaires are installed. During this process, a DALI
address and also a logical address are assigned to each luminaire. This allows to locate
the installed luminaires, to identify them in the luminaires list and to designate them.
New installation of a DALI group

To install luminaires in a group, press the
group name (e.g. Group1).

Now you can select between:
• System extension: Adding one or
several luminaires without discarding
the already existing luminaires
addressing and info texts.
• Reinitialization: New addressing of all
luminaires connected to the particular
group. When selecting this option,
already assigned luminaires are
deleted and re-assigned.

When selecting "System extension", the
systems checks the current luminaires
installation prior to the actual search. All
luminaires installed on the bus are
searched.
Furthermore, it is checked whether there
are luminaires with valid addresses
installed on the bus but not present on the
SB 128 Controller's list. If such luminaires
are found, they are added automatically.
In case a part of the luminaires could not be found, a message appears asking
whether the missing luminaires are to be removed from the list (only in case of
emergency luminaires).
42 ONLITE local SB 128 Controller