Clear Cmos (Jp3); Compact Flash Mode Select (Jp4) - Avalue Technology ECM-3512 Quick Installation Manual

2.3.3

Clear CMOS (JP3)

* Default
2.3.4

Compact Flash Mode Select (JP4)

* Default
Note: If the CF is set as master, ECM-3512 will allow only one device to be
connected, such as one HDD or one CD-ROM. At this time, the HDD or
CD-ROM will be slave device. If the CF is set as slave, you may connect 2
IDE devices on 44-pin IDE port (IDE1); however, you can not use CD-ROM if
this is the case. If the CF is set as slave, and you also want to use CFcard,
you may connect one device (such as HDD) on 44-pin IDE port (IDE1).
In this case, the master will be HDD and slave will be CF.
Quick Installation Guide
Protect*
Clear CMOS
Master
Slave*
ECM-3512 Quick Installation Guide 9