Installation, Start Up, And Registration; Overview Of The Installation Process - Raven OmniSeed Viper Pro Calibration & Operation Manual

CHAPTER
3

Overview of the Installation Process

The following sections are intended as an overview of the Viper Pro installation process. These instructions
cover basic installation of the Viper Pro field computer and supplied components and cabling.
Note:
For instructions on installing additional hardware with the Viper Pro, refer to instructions provided
with the additional or optional component(s). For additional system diagrams, see Appendix A,
System Diagrams.
Basic installation of the Viper Pro system is as follows:
Review kit contents
1.
Mounting the Viper Pro field computer
2.
Mounting the DGPS receiver and antenna
3.
Route and connect console cable
4.
Route and connect vehicle power/CAN cable
5.
Connect any optional CAN or GPS components
6.
Manual No. 016-3001-015 Rev. C
I nstallation, Start Up,
C h a p t e r 3
and Registration
13