Table of Contents
Advertisement
Chapter 6
Show within distance. Select the distance filter option to locate an A-B line within a set distance of the current
GPS position. The operator may select the distance to use as a filter up to a maximum of 10 miles [16 km]
(straight A-B) or 2 miles [3.2 km] (fixed contour). The distance filter is not limited when the pivot pattern is used.
Select the desired A-B line from the list provided.
3.
Touch OK. The A-B line will be loaded and Viper will display to the guidance screen.
4.
Nudge Feature
The Nudge Feature allows the operator to adjust the calculated guidance path to match field conditions. The
default Nudge values for a new Profile are 1 inch [1 cm] and 10 inches [10 cm]. The operator may modify these
values for specific machines and implement configurations. The Nudge settings can also be adjusted within a
job to modify this feature's characteristics for a particular application.
Configuring Nudge Settings
A Profile's Nudge settings can be adjusted to match particular requirements of a job.
Note:
The in-job nudge settings will only be accessible with an A-B type guidance path (i.e. Straight Line,
Fixed Contour, Pivot).
To configure the nudge settings in a job:
Touch the Guide Menu icon on the Guidance screen.
1.
136
OmniSeed™ Viper Pro™ Installation & Operation Manual
Guide Menu
Icon
Advertisement
Table of Contents
Troubleshooting
