Create Map From Field Boundary Method; Changing Apply/No-Apply Default Colors - Raven OmniSeed Viper Pro Calibration & Operation Manual

Chapter 8

Create Map From Field Boundary Method

This method allows the operator to select an existing field boundary to use in creating a no-apply field
boundary. When the Next button is selected, a new screen is displayed showing the names of the fields stored
on the Viper internal memory.
The operator selects the desired field boundary to create a no-apply boundary for the field. A no-apply zone for
three implement widths around the extents of the largest zone will be created based on the field boundary file.
Note:
The file selected must have a completed boundary. If the file selected does not have a completed
boundary, a prompt will be displayed indicating that the boundary is not complete. Select another
option or another field that contains a completed boundary.

Changing Apply/No-Apply Default Colors

The Viper Pro assigns the default colors to apply and no-apply zones. The default colors used to identify apply
and no-apply zones on the Viper Pro display may be modified
Select Menu.
1.
Select Setup, Maps, and Scout Maps.
2.
Note:
The apply and no-apply labels will be grayed out and cannot be changed, but the color can be
changed by the operator.
Touch Color next to the apply or no-apply feature name. The Feature Colors screen displays.
3.
Touch the desired color to assign to the apply or no-apply zone and touch OK. Viper assigns the color to the
4.
zone and returns to the Enter Features Name and Color screen.
For other zones, repeat step 3 through 4.
5.
Touch OK when to finish modifying the colors for the apply and no-apply zones. Viper saves the information
6.
and returns to the Main Screen.
Note:
Select colors for the apply and no-apply zones that are different from the coverage map colors, as
the coverage map will be painted over the Section Control map in the Section Control tab.
194 OmniSeed™ Viper Pro™ Installation & Operation Manual