Intermec EasyCoder PX6i User Manual page 73

The Setup Mode is organized as an endless loop, from which you can
select a number of sub-categories. At startup, the fi rmware determines if
an EasyLAN interface board is installed in the printer. If so, the Network
setup menus are shown in the Setup Mode.
The diagram below shows the options in the main loop. Detailed over-
views are shown on the pages that follow.
SETUP:
SER-COM
SETUP:
CONFIGURATION
SETUP:
MEDIA
EasyCoder PX6i User's Guide (IPL version)
Starting point
Chapter 7 — Setup Mode
SETUP:
NETWORK
Option
SETUP:
TEST/SERVICE
59