Intermec EasyCoder PX6i User Manual page 55

Ribbon Load, cont.
6d
In case of 154 mm (6.0 inches) ribbon
width, compress the ribbon supply
bobbin and move it so it snaps into the
fi fth groove.
7
Press the ribbon roll onto the ribbon
supply bobbin (1) and route the ribbon
through the print unit. Pull out 20 cm (8
inches) of ribbon.
EasyCoder PX6i User's Guide (IPL version)
Chapter 5 — Thermal Transfer Printing
6e
In case of 166 mm (6.5 inches) ribbon
width, compress the ribbon supply
bobbin and move it so it snaps into the
sixth groove.
8
Without releasing the ribbon, turn the
printhead lift lever to "Closed" position
to lock the ribbon.
41