Powering On/Off The Projector - Xerox DP1011 User Manual
Visioneer projector user's guide dp1011
Hide thumbs
Advertisement
Powering On/Off the Projector
Xerox DP1011 User's Guide
To turn on the projector power
1. Remove the lens cap.
2. Make sure that the power cord and the cables from the video
sources are securely connected to the projector.
3. Turn on the lamp by pressing the Power button on the control
panel or on the Remote Control.
The startup screen displays for 20 seconds and the
Power/Standby indicator flashes green.
When the startup screen disappears, the Power/Standby
indicator turns a steady green.
4. Turn on your video source device (computer, notebook, DVD
player, video player, etc.). The projector detects the video
source automatically.
If the screen displays "No Signal", please make sure the signal
cables are securely connected.
If you connect multiple sources at the same time, use the Source
button on the remote control or control panel to switch among
them.
NOTE:
Turn the projector on first, then the computer.
Lens cap
Installation
Power
8
Advertisement
Table of Contents
Related Manuals for Xerox DP1011
-
Projector Xerox DP 820 User Manual
Xerox projector user's guide (44 pages)
-
Projector Xerox DP 1015 User Manual
Xerox projector user's guide (46 pages)