Download  Print this page

Adjust The Computer Image - Xerox DP1011 User Manual

Visioneer projector user's guide dp1011
Hide thumbs

Advertisement

Adjust the Computer Image

Xerox DP1011 User's Guide
1. Press the Menu button on the Remote Control or Panel Control
to open the OSD.
2. Select the Computer Image menu and press the Enter button.
The Computer Image menu appears.
3. Use the
keys to select the item you want, and use the
keys to adjust the selected setting.
4. When the new settings are what you want, press the Menu
button again.
Auto Image—Automatically adjust the frequency, tracking, and
horizontal and vertical position. For most video sources, Auto
Image provides the best results.
Frequency—Changes the display data frequency to match the
frequency of your computer's graphics card. If a vertical flickering
bar appears on the image, adjust the frequency until it disappears.
Tracking—Synchronizes the signal timing of the display with the
timing of your computer's graphics card. If the image flickers or is
unstable, adjust the tracking until the image is stable.
Horizontal and Vertical Position—Moves the image left and right,
and up and down on the screen.
Reset This Menu—Resets the projector's display settings to their
original factory settings. Select Yes to reset the menu.
User Controls
17

Advertisement

Table of Contents
loading

  Related Manuals for Xerox DP1011

This manual is also suitable for:

Xdp1011-5d - dp 1011 xga dlp projector