Download  Print this page

Adjust The Video Image - Xerox DP1011 User Manual

Visioneer projector user's guide dp1011
Hide thumbs


Adjust the Video Image

Xerox DP1011 User's Guide
1. Press the Menu button on the Remote Control or Panel Control
to open the OSD.
2. Select the Video Image menu and press the Enter button.
The Video Image menu appears.
3. Use the
keys to select the item you want, and use the
keys to adjust the selected setting.
4. When the new settings are what you want, press the Menu
button again.
Color Saturation—Adjusts the video image from black and white
to fully saturated color. The higher the number, the greater the
color saturation.
Sharpness—Adjusts the sharpness of the image. The higher the
number the sharper the image.
Tint—Adjusts the color balance of red and green. Decreasing the
tint, increase the amount of green in the image. Increasing the tint
increases the amount of red in the image.
Reset This Menu—Resets the projector's display settings to their
original factory settings. Select Yes to reset the menu.
User Controls


Table of Contents

  Related Manuals for Xerox DP1011

This manual is also suitable for:

Xdp1011-5d - dp 1011 xga dlp projector