1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Projector
  5. DP 1015
  6. User manual

Xerox DP 1015 User Manual

Xerox projector user's guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DP 1015
projector
user's guide

Advertisement

Table of Contents
loading

Related Manuals for Xerox DP 1015

Summary of Contents for Xerox DP 1015

  • Page 1 DP 1015 projector user's guide...
  • Page 2 Xerox DP1015 projector user’s guide...
  • Page 3 Xerox ®, the digital X ® are registered trademarks of Xerox Corporation in the United States and/or other countries and are used under license. All other Xerox product names and product numbers mentioned in this publication are trademarks of Xerox Corporation.

  • Page 4: Table Of Contents

    The Xerox DP1015 Features and Controls ........
  • Page 5 Xerox DP1015 Projector Specifications ........
  • Page 6 Xerox DP1015 User’s Guide Welcome Your new Xerox DP1015 projector is an XGA/SVGA single chip 0.7” DLP™ (Digital Light Processing) projector with these outstanding features: • True XGA, 1024 x 768 addressable pixels SVGA, 800 x 600 addressable pixels •...
  • Page 7 To replace the lamp, follow the procedures in “Changing the Lamp” on page 27. Warning—Reset the “Reset Lamp Hours” function from the On Screen Display “Management” menu after replacing the lamp module (refer to “Projector Management” on page 26). Xerox DP1015 User’s Guide...

  • Page 8: Precautions

    Do’s and Don’ts Xerox DP1015 User’s Guide • Turn off the projector before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the projector is not being used for a long period of time.

  • Page 9: The Xerox Dp1015 Projector

    What’s in the Box The Xerox DP1015 Projector Before proceeding, check the contents of the box. If items are missing or damaged, contact the dealer where you purchased the projector. Projector with lens cap Carrying Case with Shoulder Strap Batteries Remote Control User’s Guide CD, Quick Installation...

  • Page 10: The Xerox Dp1015 Features And Controls

    The Xerox DP1015 Features and Controls Projection Lens Lens Cap M1DA Connector Xerox DP1015 User’s Guide Audio Speaker Control Panel Focus Ring Zoom Wheel Kensington™ Lock Slot Foot Adjustor Release Button Infrared Remote Sensor Audio Speaker—Provides audio if the Video Adapter is attached.

  • Page 11: Video Adapter Connection Ports

    The Xerox DP1015 Projector Video Adapter Connection Ports VGA Port—Plug the VGA cable into this VGA port, and plug the other end into the video port on your computer. Use this port to project video from your computer with the projector.

  • Page 12: Removing And Replacing The Video Adapter

    Removing and Replacing the Video Adapter Xerox DP1015 User’s Guide Remove the video adapter if you want to project non-video data— such as spreadsheets or text documents—from your computer. 1. Make sure the projector’s power is turned off. 2. Unscrew the two thumbscrews.

  • Page 13: Connecting The Projector

    Your DP1015 projector works best when the computer screen resolution is set to 1024 x 768 or less. To reset the computer screen resolution, see “Setting the Screen Resolution” on page 35. USB and VGA connectors M1DA/VGA and USB cable Video Adapter (Removed) Xerox DP1015 User’s Guide...

  • Page 14: Connecting The Projector For A Video And Audio Display

    Connecting the Projector for a Video and Audio Display Digital Tuner Computer Video In with Remote Control as the Mouse Xerox DP1015 User’s Guide Your projector can display video and play audio from a variety of sources, as shown in the following figure. S-Video Cable Audio In/Out...

  • Page 15: Connecting Components

    Composite Video Cable into the corresponding red and white ports on the projector. Then plug the red and white connectors on the other end of the cable into the corresponding ports on the DVD Player or VCR. Xerox DP1015 User’s Guide...

  • Page 16: Connect To A Composite Video Dvd Player Or Vcr

    Connect to a Composite Video DVD Player or VCR Connect to a Digital Tuner Xerox DP1015 User’s Guide 3. Do NOT plug the yellow connector into the projector or the DVD Player or VCR. The audio will play through the built-in audio speaker on the projector’s Video Adapter.

  • Page 17: Powering On/Off The Projector

    If the screen displays “No Signal”, please make sure the signal cables are securely connected. NOTE: Turn the projector on first, then the computer and other components. Lens cap Power Xerox DP1015 User’s Guide...

  • Page 18: Led Indicator

    LED Indicator Xerox DP1015 User’s Guide To turn off the projector power 1. Press the Power button on the projector or remote control to turn off the projector lamp. An on-screen message appears asking if you’re sure you want to turn off the lamp.

  • Page 19: Adjusting The Projected Image

    2. Lower the projector, then release the foot adjustor release button to lock the foot in position. NOTE: When placing the projector in its carrying case, please first retract the foot adjustor to avoid breakage. Foot Adjuster Release Button Xerox DP1015 User’s Guide...

  • Page 20: Adjusting The Projector Zoom/Focus

    Size (SVGA) Maximum Screen Size (SVGA) Xerox DP1015 User’s Guide You adjust the focus and zoom in/out with the focus ring and zoom wheel. To focus the image, rotate the focus ring until the image is clear. The projector can focus to distances from 4.58 feet to 32.81 feet (1.4m to 10.0m).

  • Page 21: User Controls

    OSD menus displayed: Selects items or Keys adjusts settings of items. OSD menus not displayed, and you have multiple video sources connected: Press the keys to select among the sources and pick the one to display its image. Description Xerox DP1015 User’s Guide...

  • Page 22: Remote Control

    OSD menus not displayed, and you have multiple video sources connected: Press the keys to select among the sources and pick the one to display its image. Remote used as a mouse: Moves the mouse cursor. Zoom active: Moves the zoomed image. Xerox DP1015 User’s Guide...
  • Page 23 If the projector does not pick up the signals from the remote control, make sure the emitter and sensor on the projector are not blocked and that the emitter is within range. keys to Xerox DP1015 User’s Guide...
  • Page 24 Using the Remote Control as a Mouse Xerox DP1015 User’s Guide If a USB cable is connected to your computer and the projector, the remote control can be used in place of the computer’s mouse. This is especially helpful when giving a presentation in front of an audience so you can move the mouse cursor on the screen without having to be near the computer.

  • Page 25: On-Screen Display (Osd) Menus

    Auto button. NOTE: The menus in this section show typical settings, but the actual settings you will see depend on the type of video signal. Selected menu (Management menu in this example) Xerox DP1015 User’s Guide...

  • Page 26: Adjust The Projector Image

    Decreasing the Hue increases the amount of green in the image. Saturation—Adjusts the image from black and white to fully saturated color. The higher the number, the greater the color saturation. Sharpness—Adjusts the sharpness of the image. The higher the number the sharper the image. Xerox DP1015 User’s Guide...
  • Page 27 2. Press the Pg.Up or Pg.Dn keys on the remote control to enlarge or reduce the image. 3. Press the keys to move the image left or right. 4. Press the Enter/R key again to return to the menu. keys will move Xerox DP1015 User’s Guide...

  • Page 28: Adjust The Computer Display Image

    User Red, User Green, User Blue—Adjust the amount of colors in the Display image. Color Temp—Adjusts the color temperature range. Higher temperatures make the screen look colder, lower temperatures make the screen look warmer. The available color temperature range is between 6100K and 9300K. Xerox DP1015 User’s Guide...
  • Page 29 User Red, User Green, User Blue—Adjust the amount of colors in the Display image. Color Temp—Adjusts the color temperature range. Higher temperatures make the screen look colder, lower temperatures make the screen look warmer. The available color temperature range is between 6100K and 9300K. Xerox DP1015 User’s Guide...

  • Page 30: Adjust The Audio

    Adjust the Audio Choose a Language Xerox DP1015 User’s Guide Volume—Adjusts the overall volume. Treble—Adjusts the treble volume. Bass—Adjusts the amount of medium and lower audio frequencies. Mute—Mutes the audio. 1. Use the keys to select the language you want.

  • Page 31: Projector Management

    RGB is for older computers, Digital RGB is for newer computers with a DVI or Digital RGB capability. When using Digital RGB as the Source Type, be sure to remove the video adapter from the projector. Xerox DP1015 User’s Guide...

  • Page 32: Changing The Lamp

    Changing the Lamp Xerox DP1015 User’s Guide Maintenance The projector’s lamp life is approximately 1500 hours of use. The projector automatically monitors the lamp life. After 1500 hours of use, the projector displays a message that the lamp life is over and the lamp needs to be replaced.
  • Page 33 10. Replace the retaining screws, cover, and cover screw. Make sure the cover is securely in place. If the cover is loose, the projector will not start. Lamp Module Xerox DP1015 User’s Guide...

  • Page 34: Cleaning The Projector

    Cleaning the Projector Cleaning the Lens Cleaning the Projector Xerox DP1015 User’s Guide Keeping the vents and lens clean will help maximize the projector’s performance. 1. Turn off the projector and let it cool down. 2. Pour a small amount of glass cleaner into the center of a soft cloth.

  • Page 35: Troubleshooting

    Press the Auto button on the remote control, or the Auto/Enter button on the projector control panel. If the image is still not projected correctly, the resolution setting of your computer screen is too high (greater than 1024 x 768) and you must reset it. Xerox DP1015 User’s Guide...
  • Page 36 Xerox DP1015 User’s Guide For Windows 3.x: 1. In the Windows Program Manager, click the Windows Setup icon in the Main group. 2. Verify that your display resolution setting is less than or equal to 1024 x 768. For Windows 95, 98, 2000, XP: 1.
  • Page 37 Adjust the focus ring on the projector. Turn the focus ring until the image comes into focus. • Make sure the distance between the projector and the screen is between 1.45m and 10.0m. See “Adjusting Projection Image Size” on page 15 for details. Xerox DP1015 User’s Guide...
  • Page 38 Xerox DP1015 User’s Guide Problem: When the projector is connected to a DVD player, playing a film with a 16:9 aspect ratio makes the image looks stretched out. Try one of these possible solutions: • Reset your DVD player to display at a 4:3 aspect ratio. See the DVD player user’s guide for the steps to adjust its aspect ratio.

  • Page 39: Xerox Dp1015 Projector Specifications

    Xerox DP1015 Projector Specifications Resolution Lamp Brightness Number of Pixels Displayable Colors Projection Distance Throw Ratio Zoom Ratio Uniformity Aspect Ratio Contrast Ratio Video Compatibility VGA Compatibility Horizontal Frequency Vertical Scan Rate Power Supply Power Consumption Input/Output Connectors Weight Dimensions (W x H x D)

  • Page 40: Setting The Screen Resolution

    If you have a Windows PC: If you have an Apple Macintosh: Xerox DP1015 User’s Guide For best viewing on your computer screen, its resolution should be set to 1024 x 768 or less. To reset the screen resolution, follow the steps below, referring to the chart on page 36 for the correct settings for your type of computer and monitor.
  • Page 41 * Compression computer image. (Analog) V. Frequency H. Frequency (Hz) (Hz) 31.5 37.9 37.9 31.5 37.9 37.5 43.3 31.5 37.9 35.2 37.9 48.1 46.9 53.7 43.4 35.5 48.4 56.5 60.0 68.7 63.8 67.5 77.1 46.4 63.98 79.98 Xerox DP1015 User’s Guide...
  • Page 42 Xerox DP1015 User’s Guide Compatibility Modes—Macintosh Computers Mode Resolution MAC 16”* 832 x 624 MAC 19”* 1024 x 768 MAC* 1152 x 670 MAC G4 640 x 480 MAC G4 640 x 480 MAC G4 1024 x 768 IMAC DV...
  • Page 43 Maintenance Xerox DP1015 User’s Guide...

  • Page 44: Notices

    (2) this device must accept any interference received, including interference that may cause undesired operation. Xerox operates a worldwide equipment takeback and reuse/ recycle program. Contact your Xerox sales representative (1-800- ASK-XEROX) to determine whether this Xerox product is part of the program.
  • Page 45 If your product is not part of the Xerox program and you are managing its disposal, please note that the product may contain lead and other materials whose disposal may be regulated due to environmental considerations. For recycling and disposal information, contact your local authorities.
  • Page 46 05-0603-000...

Table of Contents