Download  Print this page

Warning Indicator Lights - Xerox DP1011 User Manual

Visioneer projector user's guide dp1011
Hide thumbs

Advertisement

Warning Indicator Lights

Xerox DP1011 User's Guide
To turn off the projector power
1. Press the Power button on the projector or Remote Control to
turn off the projector lamp.
An on-screen message appears: Power off the lamp?
2. Press the Power button again to confirm.
If you don't press the button again within five seconds, the
message disappears and the lamp remains lit. This convenient
design is in case you accidently press the Power button in the
middle of a show and do not want to turn off the projector.
If you do press the Power button a second time, the
Power/Standby indicator flashes
Then the projector automatically shuts itself down.
3. To turn on the projector again, press the Power button within
40 seconds of the indicator flashing.
4. Disconnect the power cord.
NOTE:
Do not turn off the projector immediately following a
power off procedure. Let it cool down first.
If the Warning indicator turns red, the projector has overheated.
The projector will automatically shut itself down.
A Warning indicator flashing
indicates a problem with the lamp. Turn off the projector and
disconnect the power cord from the electrical outlet, then
contact your local dealer or our service center.
A Warning indicator flashing
an internal problem. Turn off the projector and disconnect the
power cord from the electrical outlet, then contact your local
dealer or our service center.
A Warning indicator flashing orange, indicates high-speed
cooling in progress. This is not an abnormal condition, and you
can continue using the projector.
orange
Warning Indicator
red
(0.5 second intervals),
red
(1 second intervals), indicates
Installation
for about 40 seconds.
9

Advertisement

Table of Contents
loading

  Related Manuals for Xerox DP1011

  Related Content for Xerox DP1011

This manual is also suitable for:

Xdp1011-5d - dp 1011 xga dlp projector