7.4.3.
Reference Plate (B)
(1) Remove the CIS (F). (See
(2) Remove the Screw E.
(3) Remove the spring.
(4) Remove the Slider in the direction of the arrows.
Reassembling Note:
(1) Slider Gear Positioning.
Move the Slider Gear to the position where the gear
touches the rib.
(2) Slider Positioning.
Insert the Slider into the Slider groove.
With the position of the gear maintained, install the
Slider so that the Slider touches 2 ribs.
Slider Gear Positioning
Slider Gear Positioning
Slider Positioning
Slider Positioning
Rib
(5) Remove the Polyslider and the Reshuffling Lever.
(6) Remove the Reference Plate (B).
7.4.4.
DOOR DETECTION Board
(1) Remove the Back Cover. (See
(2) Remove the DOOR DETECTION Board, while unlocking the
hook.
(3) Disconnect the connector.
(
))
CIS (F)
P.32
Rib
Slider Gear
Slider
Slider groove
(
))
Back Cover
P.26
E Spring
Reshuffling Lever
Polyslider
DOOR
DETECTION Board
Hook
33
Slider
Reference Plate (B)