Lower Chassis; Bottom Plate; Platen Motor; Fan - Panasonic KV-S1057C Service Manual

7.5.

Lower Chassis 2

7.5.1.

Bottom Plate

(1) Remove the Back Cover. (See
(2) Remove the screw A and the USB Earth Plate.
(3) Remove the 7 screws C.
(4) Remove the 2 screws F.
(5) Remove the Bottom Plate.
Reassembling Note:
Install the Bottom Plate with screws C and F first and then
install the USB Earth Plate with screw A.
Otherwise the USB Earth Plate may not contact with the
USB jack on the Control Board correctly.
7.5.2.

Platen Motor

(1) Remove the Bottom Plate. (See
(2) Remove the screw C.
(3) Remove the Platen Motor with Motor Plate.
(4) Remove the 2 screws G and remove the Platen Motor from
the plate.
7.5.3.

FAN

(1) Remove the Bottom Plate. (See
(2) Remove 2 screws E.
(3) Disconnect the connector on the CONTROL Board.
(4) Remove the FAN.
7.5.4.

Power Supply

(1) Remove the Bottom Plate. (See
(2) Remove the 2 screws C.
(3) Remove the Power Supply.
(4) Disconnect the connector from the CONTROL board on the
Power Supply.
7.5.5.

CONTROL Board

(1) Remove the Bottom Plate. (See
(2) Disconnect all connectors (7 cable connectors and 4 FFC
cables) to CONTROL Board.
(3) Remove the CONTROL Board
( ))
Back Cover P.26
( ))
Bottom Plate P.36
( ))
Bottom Plate P.36
( ))
Bottom Plate P.36
( ))
Bottom Plate P.36
USB Earth Plate
Control Board
Power Supply
FAN
E
36
F
A
Bottom Plate
C
Platen Motor
C
G
Motor Plate
C
Control Board