Count-Down, -Up - Vision Fitness X6200HRC Owner's Manual

COUNT-DOWN MODE
In Count-Down mode, the timer
starts with a set number of minutes
and moves to zero. Count-Down
times of between 5 minutes and
99 minutes can be selected. You
vary the time by pressing either
the UP or the DOWN Arrows.
The preset workout time for each
Program has been chosen to
match the Program's primary
fitness goal. However, you may
want to customize the workout
time to fit your present fitness level,
or to fit your personal fitness
goals. When the time you choose to use is showing in the number
screen, press the ENTER button.
COUNT-UP MODE
In Count-Up mode, the timer starts
with zero and goes up. You select
Count-Up mode by setting the
time to '00:00' and pressing the
ENTER button.
In Count-Up mode each program
segment will last 1 minute. When
the program is finished, there will
be a single beep and the
program will immediately begin
start over. Because their are 16
segments on the profile screen,
each program cycle will take 16
30
minutes. Program time and other function data will accumulate until
START•STOP is pressed and the program is changed. The Race Program
does not operate in Count-Up Mode.
console
X 6 2 0 0 H R C X 6 2 0 0 H R C / D A