Download
Share
Print this page
Vision Fitness X6200 Assembly Manual
  1. Manuals
  2. Brands
  3. Vision Fitness Manuals
  4. Elliptical Trainer
  5. X6200 Frame 9
  6. Assembly manual
Vision Fitness X6200 Assembly Manual

Vision Fitness X6200 Assembly Manual

Folding
Hide thumbs Also See for X6200:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual See also: Service Manual, Owner's Manual
A s s e m b l y
G u i d e
X6200
FOLDING ELLIPTICAL TRAINER

Advertisement

loading

Related Manuals for Vision Fitness X6200

Summary of Contents for Vision Fitness X6200

  • Page 1 A s s e m b l y G u i d e X6200 FOLDING ELLIPTICAL TRAINER...
  • Page 2 A s s e m b l y G u i d e X6200 FOLDING ELLIPTICAL TRAINER To avoid possible damage to this Elliptical Trainer, please follow these assembly steps in the correct order. Before proceeding, find your new Elliptical Trainer’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
  • Page 3 HARDWARE, TOOLS & PARTS INCLUDED Screwdriver 5mm L-Shaped Wrench 13mm Wrench 17mm Wrench PARTS BOX Console Mast Boot, Qty: 1 Dual Action Link Arm Covers, Qty: 2 Dual Action Axle Covers, Qty: 2 Rear Stabilizers, Qty: 2 Pedal Support Bracket, Qty: 2 6mm L-Shaped Wrench Water Bottle &...

  • Page 4: Hardware Included

    HARDWARE INCLUDED ORANGE BAG BLACK BAG M5x10x1T M8x14x1.5T Washer Washer Quantity: 2 Quantity: 4 M8x25x1.5T Washer M8x35x2T Washer Quantity: 2 M8x20L Screw Quantity: 2 Quantity: 2 M5x12L Screw Quantity: 4 GREEN BAG M8x30L Screw Quantity: 2 M25x34x2T Wavy Washer Quantity: 2 M20x29x1.5T M8x13L Screw Wavy Washer...
  • Page 5 ORANGE BAG STEP • For ease of assembly place a block of wood (about 1” thick) under the rear of the frame. Slide the axle through the rear support tube. On the left side of the axle slide on the left guide rail and STEP the left stabilizer.
  • Page 6 PINK BAG STEP • Slide the rubber boot on to the console mast. • Unfold the wire harness located in the frame bracket. Wrap the wire tie STEP coming from the bottom of the console mast around the end of the wire harness.
  • Page 7 GREEN BAG STEP • Slide a wavy washer (M20x29x1.5T) on the lower link arm axle, which is located under the foot plate. Slide the axle through the bracket located on top of the pedal arm. • Secure the lower link arm in place by attaching the pedal support bracket and screw (M8x13L).

  • Page 8: Safety Guards

    Phillips screwdriver to lock in place. 500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com 2003 Vision Fitness. All Rights Reserved. 8.03 Part #Z62EP34C-AG1828PRD AG18.28PRD REV1...