Resetting, Scan On•Off - Vision Fitness X6200HRC Owner's Manual

RESET
After a Program has begun, you
may quit the Program by pressing
and holding the START•STOP
button for 2 seconds. The column
of red program lights will flash
and the console profile screen will
show the Manual Program.
AUTO-RESET
If your Vision Fitness Elliptical
Trainer is not used for 5 minutes, it
will automatically reset itself.
(Auto-reset will not work when the
timer is operating in Count-Up
mode.)
SCAN ON•OFF
When the SCAN button is
pressed, the red LED next to
'SCAN' will light up, indicating
Scan is on. When Scan is on, the
number display will cycle
between each data function
(except weight) showing a new
data display every four seconds.
To turn Scan off, press the SCAN
button again. The Scan light will
no longer be on.
27
console
X 6 2 0 0 H R C X 6 2 0 0 H R C / D A