Appendix; Emc-Supplement To The Operating Guide - Gaspardo PRECIMAT Use And Assembly Instructions / Spare Parts

6.0 APPENDIX

6.1 EMC-SUPPLEMENT TO THE OPERATING GUIDE

Safety notice for the subsequent installation of electrical and
electronic devices and/or components
Present-day agricultural machines are equipped with electronic
components and devices, whose function can be affected by
electromagnetic emission from other devices. These influences
can lead to endangerment for individuals when the following safety
measures are not adhered to.
When subsequently installing electrical and electronic devices and/
or components in a machine with a connection to the electrical
system, the user must take sole responsibility for testing the instal-
lation for interference with vehicle electronics or other components.
This applies in particular to the electronic controls of:
- EHR,
- front lifting gear,
- power take-off shafts,
- engine and
- gears.
Above all it must be ensured that all subsequently installed electrical
and electronic components comply with the current version of the
EMC directive 89/336/EWG and carry the CE symbol.
In addition the following requirements must be fulfilled when upgra-
ding with mobile communication systems (e.g. radio, telephone):
- Only approved devices complying to national regulations (e.g.
BZT approval in Germany) are to be installed;
- The device must be securely installed;
- The use of portable or mobile devices inside the vehicle is permis-
sible only via a connection to the permanently installed outside
antenna;
- The transmitting unit is to be installed in a position away from the
vehicle electronics;
- An antenna should only be installed professionally ensuring that
there is a good earth connection between the antenna and the
vehicle chassis.
Please refer to the manufacturer's instructions for cabling and
installation as well as for the maximum current consumption.
cod. G19503910
USE AND MAINTENANCE

ENGLISH
23