Instructions For Use; Description Of The Precimat System; Technical Data; Installation Precimat - Gaspardo PRECIMAT Use And Assembly Instructions / Spare Parts

ENGLISH

3.0 INSTRUCTIONS FOR USE

3.1 DESCRIPTION OF THE PRECIMAT SYSTEM

The PRECIMAT contains 2 programs:
- Control unit for precision seed drills (max. 12 aggregates) with
seeds counting (optical sensor).
- Area counter for all machines.
- The PRECIMAT for the precision seed drill consists mainly of:
the electronic control unit (ECU) (installed in the cabin of the
tractor) which serves for the input of values as well as for monito-
ring. An acoustic and optic alarm is triggered when a malfunction
appears.
- The machine junction box (installed on the frame of the precision
seed drill) with a connecting cable to the ECU.
- The optical sensors, each one installed at the lower part of the
frame of any aggregate with a connecting cable to the junction
box.
- The sensor A to detect the driven distance. Installed on the bra-
cket at the driveshaft.

3.2 TECHNICAL DATA

PRECIMAT
- Power supply voltage ..........................................12V
Speed sensor
- Power supply voltage .........................................10-30 V (max)
- Max. working frequency ......................................1 2 0 0
(max)...................................................................
- Working temperature ..........................................-25/+70 °C
- Max. operation distance .....................................0-4 mm
- Protection degree ...............................................IP67
The technical data and the models provided must be considered as
non binding. We reserve the right to change them without notice.

3.3 INSTALLATION PRECIMAT

3.3.1 COMPUTER

The computer is to be installed together with the console within
the driver's field of vision. The distance from the radio equipment
or radio antenna should be at least 1 meter.
16
USE AND MAINTENANCE

3.3.2 12V SOCKET CONNECTION TO THE TRACTOR BATTERY

For the PRECIMAT's power supply (computer and sensors) the
supplied 12V socket is to be connected to the tractor battery. No
second device should be connected to this 12V socket. The 12V
socket must be protected by a 25 safety fuse, which is to be found
in the wire connector to the brown 12 V wire.
Wire colours:
brown = + 12 Volt
blue = Ground
The battery's negative pole must always be connected to ground
(frame, chassis).
H z

3.3.3 MACHINE JUNCTION BOX

The machine junction box and the sensors are factory installed.

cod. G19503910