Operating Procedure; Maintenance; Computer; Sensors - Gaspardo PRECIMAT Use And Assembly Instructions / Spare Parts

3.4.5.6 "Speed" key
After pressing this key the current speed is displayed.

3.4.6 OPERATING PROCEDURE

Display in working condition:
3
4
1) Aggregat number;
2) Number of seeds (x 1000)/ha;
3) Working position on;
4) Wheel impulses.
After entry of all machine data only the start function
must be activated.
During work the current seeds/ha and the aggregate number are
displayed. After 5 seconds the display changes automatically to
the next aggregate.
When the computer detects a failure, this is displayed. In addition
to this the buzzer sounds.
When a function key is pressed, the requested value is displayed
for 5 seconds. After this time the computer switches back to the
display of "seeds/ha" with aggregate number.
When work is finished all counters can be retrieved and annotated.
cod. G19503910
USE AND MAINTENANCE
1
2


4.0 MAINTENANCE

4.1 COMPUTER

The computer is free of maintenance. During the winter it should
be stored in a tempered room.

4.2 SENSORS

The optical sensors must be cleaned with a soft brush if they are
dirty.
If the dirt cannot be cleaned in dry status the optical sensor has to
be cleaned with water with washing-up liquid. Afterwards dry the
sensor with a cloth which is free of grease.
The cleaning concerns the internal space of the optical sensor
(Infrared-diode and photo transistors).
The wheel sensor is free of maintenance.
ENGLISH
21