Table of Contents
Advertisement
Cleanup
Cleaning the sprayer is required after each
use to remove any disinfectants and residues
from the sprayer. It will also help ensure a
trouble free start up the next time the sprayer
is used.
Use only water for cleaning.
Clean in a well-ventilated area. Keep a
good supply of fresh air moving through
the area.
NOTICE
Disinfectant left in sprayer will damage the
sprayer. To avoid damage, always
completely flush with warm soapy water
after every use. See Cleanup, page 19. Do
not store sprayer with disinfectant in it.
1.
Perform Pressure Relief Procedure,
page 12.
2.
Remove Spray Tip Guard and Spray Tip.
For additional information, see Clean
the Gun, page 22.
3A7656C
Clean Drain Tube
3.
Remove Suction Tube and Drain Tube
from pail of disinfectant, wipe excess
disinfectant off outside.
4.
Place Suction Tube in bucket of warm
soapy water. Place Drain Tube in waste
bucket. For disinfectants with alcohol
active ingredients, ground the bucket
according to Grounding, page 10.
Cleanup
ti24709a
ti24710a
19
Advertisement
Table of Contents
