Table of Contents
Advertisement
Setup
When unpacking sprayer for the first time or
after long term storage, perform Setup
procedure.
1.
Connect 1/4" Graco Airless Hose to Fluid
Outlet Fitting (remove red storage plug
from fitting if present). Use wrenches to
tighten securely.
2.
Assemble optional 1/8" Airless Whip
Hose to end of 1/4" Airless Hose. Use
wrenches to tighten securely.
3A7656C
3.
Insert other end of Airless Whip Hose
through Hose Guard at base of Spray
Gun. Connect to Spray Gun. Use
wrenches to tighten securely.
4.
Remove Spray Tip Guard assembly
from Spray Gun.
NOTE: This sprayer can be configured to
spray with two guns. To setup:
a.
Replace plug in manifold with
provided fitting.
b.
Follow Setup instructions 1-4 for
assembly of second Airless Hose
and Spray Gun.
The provided fitting may also be used to
connect two 50 foot hoses to provide 100 feet
of hose to one Spray Gun.
Setup
11
Advertisement
Table of Contents
