Technical Specifications - Graco SaniSpray HP 130 Operation - Repair - Parts

Cart airless sprayer
Table of Contents

Advertisement

Technical Specifications

Technical Specifications
SaniSpray HP 130 Cart Airless Sprayer
Sprayer
Maximum fluid working pressure 1000 psi
Maximum Delivery
Maximum Tip Size
Single Gun
Two Guns
Fluid Outlet npsm
Generator Minimum
Power Requirements
Dimensions
Height
Length
Width
Weight
Noise** (dBa) @ 70 psi (0.48 MPa, 4.8 bar)
Sound pressure
Sound power
Materials of Construction
Wetted materials on all models
Notes
* Startup pressures and displacement per cycle may vary based on suction condition,
discharge head, air pressure, and fluid type.
** Sound pressure measured 3 feet (1 meter) from equipment.
Sound power measured per ISO-3744.
 Never store with disinfectant or water in sprayer.
All trademarks or registered trademarks are the property of their respective owners.
California Proposition 65
CALIFORNIA RESIDENTS
WARNING: Cancer and reproductive harm –
www.P65warnings.ca.gov.
38
US
1.0 gpm
0.031 in
0.023 in
100-120V, 15A, 1Ø or 220-240V, 9A, 1Ø
28.25 in. (Handle down)
38.25 in. (Handle up)
23.25 in.
20.5 in.
75 lb.
90 dBa
100 dBa
stainless steel, PTFE, acetal, leather, UHMWPE, anodized
aluminum, tungsten carbide, polyethylene,
fluoroelastomer, urethane, nylon, PE-RT
Metric
69 bar, 6.9 MPa
3.8 lpm
0.79 mm
0.58 mm
1/4 in.
4000 W
71.8 cm (Handle down)
97.2 cm (Handle up)
59.1 cm
52.1 cm
34 kg
3A7656C

Advertisement

Table of Contents
loading

This manual is also suitable for:

25r79325r94725r95125r95525t301

Table of Contents