Clean The Gun; Storage - Graco SaniSpray HP 130 Operation - Repair - Parts

Cart airless sprayer
Table of Contents

Advertisement

Storage

13. Turn Prime/Spray Valve down to PRIME
position.
14. Turn Pressure Control Knob to lowest
setting and turn ON/OFF Switch to OFF
position. Disconnect power to sprayer.
15. Wipe sprayer and Airless Hose with soft
cloth moistened with water.
22
16. Dispose of unused disinfectant and fluid
in the waste bucket according to the
instructions on the disinfectant container
label and applicable regulations.

Clean the Gun

1.
Remove Spray Tip and Spray Tip Guard
assembly. Clean with water and a brush.
2.
Wipe Spray Gun with soft cloth
moistened with water.
Storage
With proper storage, the sprayer will be ready
to use the next time it is needed.
NOTICE
Disinfectant left in sprayer will damage the
sprayer. To avoid damage, always
completely flush with warm soapy water
after every use. See Cleanup, page 19. Do
not store sprayer with disinfectant in it.
Before storing sprayer, make sure all
water is drained out of sprayer and
Airless Hose.
Do not allow water to freeze in sprayer or
Airless Hose.
Do not store sprayer under pressure.
Store sprayer indoors.
3A7656C

Advertisement

Table of Contents
loading

This manual is also suitable for:

25r79325r94725r95125r95525t301

Table of Contents