Table of Contents
Advertisement
Start Up
Start Up
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
This equipment stays pressurized until
pressure is manually relieved. To help
prevent serious injury from pressurized
fluid, such as skin injection, splashing fluid
and moving parts, follow the Pressure
Relief Procedure whenever sprayer is
stopped and before sprayer is cleaned or
checked, and before equipment is
serviced.
1.
Turn ON/OFF Switch to the OFF
position.
12
2.
Engage the Trigger Lock. Always
engage the Trigger Lock when sprayer is
stopped to prevent the Spray Gun from
being triggered accidentally.
3.
Turn Pressure Control Knob to the
lowest setting.
4.
Put Drain Tube in a pail and turn
Prime/Spray Valve down to PRIME
position to relieve pressure.
3A7656C
Advertisement
Table of Contents
