Hartmann Veroval compact BPU 22 Instructions For Use Manual page 54

English
EN DE
Individual measured values
By pressing the button again (or
ton, if you are in user memory 2), all memory
values can be retrieved one after the other,
starting with the most recent measured value.
If an irregular heartbeat was detected during measurement,
that information is also stored and displayed when the
measured value is retrieved from the device's memory along
with the systolic and diastolic blood pressure readings, pulse
rate, time, date and year.
You can cancel the memory recall at any time by pressing the
START/STOP button . Otherwise, the device will switch off
automatically after a few seconds.
Even if the power supply is interrupted, e.g. when changing the
batteries, the stored values will still be available.
Deleting saved readings
All data saved for each user can be separately deleted for user
memory and user memory
but-
1 M
. To do so, press the button of the
corresponding user memory (
appear on the display.
Press and hold the user memory button for 5 seconds. 'CL 00'
appears on the display. All data in the selected user memory are
now deleted. If you release the button ahead of time, no data will
be deleted.
54 54
or ). The average value will then