Table of Contents
Advertisement
Quick Links
TG-AM2F20098
Parts List
Driver Side Armor
x1
Passenger Side Armor
x1
10mm x 27mm OD x 3mm Flat Washers
x36
Passenger/right Side
Armor Assembly
Before Installation
REMOVE CONTENTS FROM BOX. VERIFY ALL
PARTS ARE PRESENT. READ INSTRUCTIONS
CAREFULLY BEFORE STARTING INSTALLATION.
ASSISTANCE IS HIGHLY RECOMMENDED.
support@tygerauto.com
TYGER ARMOR
10-1.5mm x 30mm Hex Bolts
x24
10mm Clip Nuts
x12
10mm Lock Washers
x24
Front
Warning
To protect your investment, wax this product after installing. Regular waxing is
recommended to add a protective layer over the nish. Do not use any type of polish
or wax that may contain abrasives that could damage the nish. Use only mild soap
to clean the Side Armor.
www.tygerauto.com
1/4
TM
Customer Support 1-866-340-3038
10mm Hex Nuts
x12
Driver/Left Side Armor
Assembly
Front
TM
1-866-340-3038
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tyger ARMOR TG-AM2F20098
Summary of Contents for Tyger ARMOR TG-AM2F20098
- Page 1 Customer Support 1-866-340-3038 TYGER ARMOR TG-AM2F20098 Parts List Driver Side Armor 10-1.5mm x 30mm Hex Bolts 10mm Hex Nuts Passenger Side Armor 10mm Clip Nuts 10mm x 27mm OD x 3mm Flat Washers 10mm Lock Washers Driver/Left Side Armor Assembly...
- Page 2 STEP 1 Line up Clip Nut with factory hole Starting on the driver side of the vehicle, locate the (5) pairs of factory holes along the bottom of the body, (pinch weld). NOTE: Side Armor will attach to the 2nd, 3rd and 5th mounting locations, (Figure 1).
- Page 3 (2) 10mm Hex Bolts STEP 2 (4) 10mm Flat Washers (2) 10mm Lock Washers (2) 10mm Hex Nuts Move to the 2nd pair of holes along the pinch weld, directly under the center of the front door, (Figures 1 & 2). Select (2) 10mm Clip Nuts.
- Page 4 STEP 6 STEP 9 Line up the holes in the bottom of the mounting brackets on the Do periodic inspections to the installation to make sure that all Side Armor with the (6) mounting holes in the pinch weld. Attach hardware is secure and tight.
Need help?
Do you have a question about the ARMOR TG-AM2F20098 and is the answer not in the manual?
Questions and answers