HP EliteBook x360 1030 G7 Maintenance And Service Manual page 68

Table 5-10 System board descriptions and part numbers (continued)
Description
Equipped with an Intel Core i5-10310U processor, 16 GB of system memory, and the Windows 10 operating system
Equipped with an Intel Core i5-10310U processor, 16 GB of system memory, and a non-Windows operating system
Equipped with an Intel Core i5-10310U processor, 8 GB of system memory, and the Windows 10 OSR operating system
Equipped with an Intel Core i5-10310U processor, 8 GB of system memory, and a non-Windows OSR operating system
Equipped with an Intel Core i5-10310U processor, 8 GB of system memory, and the Windows 10 operating system
Equipped with an Intel Core i5-10310U processor, 8 GB of system memory, and a non-Windows operating system
Equipped with an Intel Core i5-10310U processor, 16 GB of system memory, and the Windows 10 operating system
Equipped with an Intel Core i5-10310U processor, 16 GB of system memory, and a non-Windows operating system
Equipped with an Intel Core i5-10310U processor, 8 GB of system memory, and the Windows 10 operating system
Equipped with an Intel Core i5-10310U processor, 8 GB of system memory, and a non-Windows operating system
Before removing the system board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover
3. Remove the battery
4. Remove the WWAN module (see
When you replace the system board, be sure to remove the following components (as applicable) from the
defective system board and install them on the replacement system board:
Solid-state drive and shield (see
●
Fan/heat sink assembly (see
●
Sensor board and cable (see
●
Remove the system board:
1. Release the ZIF connector (1) to which the webcam/microphone module cable is connected, and disconnect
the cable from the system board.
2. Remove the WWAN module shield.
3. Disconnect the WLAN antenna cables (2) from the WLAN module terminals.
NOTE:
WLAN antenna cable connects to the WLAN module #2/Aux terminal.
4. Disconnect the following cables from the system board:
Display panel cable ZIF connector cable (3)
●
● Right speaker cable (4)
60 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Bottom cover on page
(Battery on page
WWAN module on page
Solid-state drive on page
Fan/heat sink assembly on page
Sensor board on page
The #1/white WLAN antenna cable connects to the WLAN module #1/Main terminal. The #2/black
(Preparation for disassembly on page
42).
43).
46).
45).
62).
64).
Spare part
number
M16060-601
M16060-001
M16061-601
M16061-001
M16059-601
M16059-001
M16058-601
M16058-001
M16057-601
M16057-001
42).
ENWW